US Dollar
1994-1998 Mustang
1994-1998 MUSTANG
Sub Categories
COMP Cams
COMP Cams Pushrod Ford 351W - 7472-1
$15.95
Magnum pushrods from COMP Cams offer an affordable solution for your .080" wall chromemoly Pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum pushrods are head-treated for extended durability and have precision formed,...
COMP Cams
COMP Cams Titanium Retainers For 3Valve - 702-24
$493.95
it has to be since it is used on the U.S. Air Force F-117 Stealth Fighter. Other manufacturers purchase titanium from Metal brokers and produce "cheap" retainers, but COMP Cams titanium retainers will not deform. From a standing idle to the most extreme...
COMP Cams
COMP Cams Thrust Bearing Ford 289-351W - 3135TB
$162.95
Eliminate wear at the front of your Ford 289-351W H.P. with our moly-coated roller thrust bearing. Our unique design is .142" thick and aids in setting the proper cam thrust clearance while eliminating gear to block wear.
COMP Cams
COMP Cams Roller Timing Set FW Adjustable - 3135KT
$263.95
Include induction hardened Steel billet Gears for bullet proof durability. Feature infinitely adjustable Camshaft sprocket, 6-degree maximum advance/retard.3 keyway crank sprocket for additional 4-degree incremental adjustability. Pre-stretched,...
COMP Cams
COMP Cams Thrust Bearing Ford 289-351W - 3120TB
$152.95
Eliminate wear at the front of your Ford 289-351 Windsor Block with our moly-coated roller thrust bearing. Our unique design is .142" thick and aids in setting the proper cam thrust clearance while eliminating gear to block wear.
COMP Cams
COMP Cams Camshaft FS 308-R10 - 31-761-8
$522.95
Ultimate in Pro Street. 3500+ stall, 4.10 or lower gear. Radical idle.
COMP Cams
COMP Cams Camshaft FS 288R-10 - 31-760-8
$522.95
Broad power, lower gear ratio, 2500+ stall with headers. Rough idle.
COMP Cams
COMP Cams Camshaft FS 295T H-107 T Thumper - 31-603-5
$340.95
Big Mutha' Thumpr 243/257 Hydraulic Flat Cam for Ford 221-302. Street/strip, needs 9.5:1 compression, 2800+ stall, intake, Gears and headers, very rough idle.
COMP Cams
COMP Cams Camshaft FS 287T H-107 T Thumper - 31-602-5
$340.95
Mutha' Thumpr 235/249 Hydraulic Flat Cam for Ford 221-302. High performance street/strip, needs 9:1 compression, 2500+ stall, intake, Gears and headers, rough idle.
COMP Cams
COMP Cams Camshaft FS 291Th R7 Thumper R - 31-601-8
$549.95
High performance street/strip, needs 9:1 compression, 2500+ stall, intake, gears and headers, rough idle.
COMP Cams
COMP Cams Camshaft FS 279T H-107 T Thumper - 31-601-5
$340.95
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series' early...
COMP Cams
COMP Cams Camshaft FS 283Th R7 Thumper R - 31-600-8
$549.95
High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle.
COMP Cams
COMP Cams Solid Lifters FS/FC/FF Perf S - 2910-16
$173.95
These Performance Series solid lifters feature a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For Ford 289-351W/C-400M and 429-460.
COMP Cams
COMP Cams Solid Lifters FS/FC/FF Perf S - 2910-12
$123.95
Performance Series Solid Lifter Set for Ford 6 Cylinder
COMP Cams
COMP Cams Solid Lifter FS/FC/FF Perform - 2910-1
$18.95
This Performance Series solid lifter features a precision-ground crown radius and surface finish, perfect for high-end street and race engines with higher spring pressures. For Ford 289-351W/C-400M and 429-460.
COMP Cams
COMP Cams Valve Springs 1.415in Beehive - 26986-16
$270.95
With a .575" maximum lift, these Beehive Valve Springs were designed for hydraulic or Solid flat tappet as well as hydraulic Roller cams. They work in a variety of small block engines. COMP Cams Beehive Valve Springs deliver increased valve train...
COMP Cams
COMP Cams Valve Spring 1.415in Beehive - 26986-1
$26.95
With a .575" maximum lift, these Beehive Valve Springs were designed for hydraulic or Solid flat tappet as well as hydraulic Roller cams. They work in a variety of small block engines. COMP Cams Beehive Valve Springs deliver increased valve train...
COMP Cams
COMP Cams Valve Springs High Performance - 26918-12
$209.95
With a .625" maximum lift, these Beehive Valve Springs were designed for hydraulic Roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...
COMP Cams
COMP Cams Valve Spring High Performance - 26918-1
$26.95
With a .625" maximum lift, these Beehive Valve Springs were designed for hydraulic Roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less...
COMP Cams
COMP Cams Valve Springs H/L Ford 4.6L/5.4L 2V/3V V8 - 26125-32
$627.95
With a .650" maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines and Duramax Applications.