Welcome to Carroll Shelby Racing
*PRE-ORDER* SHELBY GT BEZEL (BEZEL ONLY)
*PRE-ORDER* Your original Shelby GT Brake Duct and Fog Light Bezel
NOTE: THIS IS JUST THE BEZEL ONLY (PASSENGER AND DRIVER SIDE)
Fog light "NOT" sold with this!!! Customer to source new fog light!
Brake duct hoses, brackets and hardware to cool brakes will be sold separately!
This bezel kit comes with the following:
Driver & Passenger bezel
Hardware to install
This item is still being made by the manufacturer and we are waiting on a delivery date! Please understand that it may take time before we can give an accurate date for delivery
*Pre-Order* Shelby GT Lower Grille
*PRE-ORDER YOUR SHELBY GT GRILLE*
This beautifully designed aluminum grille will give your car a sleek OE look. We recommend using rivets to complete installation. Fits Shelby GT, Shelby GT-H, and California Special
Scott Drake is remaking these beautiful grilles and we are still waiting on a delivery date from the manufacturer. Please understand that until we have these in hand this will be a pre-order and once we know the date we will pass it on.
*PRE-ORDER* Brake Duct Cooling Kit
Carroll Shelby Racing is committed to providing high quality products and this brake duct bracket kit is just one example! We have gone through great lengths to remake this kit and provide high quality material and hardware! This is an original part that we are remanufacturing for everyone. There are other brake duct kits out their, but this is by far the highest quality you are going to find!
**NOTE: This is a Pre-order item and will run from 08/20 thru 08/30! It will take 6 to 7 weeks before this item arrives to your location after the pre-order date!
***If you plan on tracking your car we have an option to get the orange 500 degree brake duct hose, but it will cost an additional amount. Typically daily use will not require the orange brake duct hose.
KIT INCLUDES THE FOLLOWING:
(2) Brake Duct Bracket Plates
-1/8" thick, 6061 Aluminum
-Powder coated in a flat black to add durability and protection
(2) 3" Brake Duct Hoses, 5ft long, Black, 300 Degrees
NOTE: Hoses are ordered longer and will need to be cut to length
-Flexible, non-kink hose directs air from front ducts to spindle ducts
(4) 3" Marine Grade Hose Clamps
-Marine-grade worm gear hose clamps are recommended for clamping all types of hose and tubing in corrosive marine environments
-.301 stainless steel worm gear clamps resist rust and corrosion and are ideal for use in humid or damp conditions.
-Min Clamp Dia 3" - Max Clamp Dia 5"
(6) Industrial Zip Ties
-UL Listed 6.6 nylon.
-Locks tightly - Won’t stretch or slide.
-Temperature range -40° to 180°F.
(6) Grade 8.8 Bolts
Shelby GT Engine Bay Cap Set (6 piece set)
THESE CAPS ARE BEING RE-MANUFACTURED BY SCOTT DRAKE AND ARE THE EXACT ORIGINALS, JUST RE-MANUFACTURED.
SET INCLUDES: (CAPS ARE A SATIN FINISH)
BRAKE FLUID CAP
OIL DIPSTICK HANDLE
POWER STEERING FLUID CAP
WINDOW WASHER FLUID CAP
CALIFORNIA PROP 65 WARNING HERE: https://www.carrollshelbyracing.com/california-prop-65.html#/
Oil Separator with CSR logo
APPLICATIONS: YOU SELECT
Limited Time Only -
**NOTE: Most of the oil will come from the Passenger Side, but for ultimate protection, you can also install the Driver side setup.
PHOTO'S ARE AN EXAMPLE OF DESIGN, YOUR OIL SEPARATOR MAY BE WITHOUT HOLES ON TOP.
Multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake.
During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens in all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled From Solid Billet Aluminum, this is a rock solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.
Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1/2" thick 1/16th" aluminum honeycomb filter where they grow even larger and then fall into the bottom. By the time the oil gets through the filter it's too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.
Comes in Black or Satin Finish
*This Product is NOT CARB (California Air Resource Board) Exempt. It is not for legal sale or use in the state of CA or any other states adopting CA emission standards and require a CA Executive Order (EO) number. Any orders placed for this item with a CA ship to address will be cancelled.
California Prop 65 Warning Here: https://www.carrollshelbyracing.com/california-prop-65.html#/
Top Quality 3M die cut vinyl DECAL
Curved for easy installation
Measurements: 41.25 X 5.62 Inches
By default the "CARROLL SHELBY" & RACE TRACK come with WHITE letters.
"RACING" comes in 5 default colors.
If you would like a custom banner we can color match to your vehicle color (or as close as possible)
- To select a custom color banner please select "Custom" from the color drop down
- Tell us the colors you want in the box that says "Custom Banner Color"
Option to add REFLECTIVE "Racing" ($7.00 extra at Check Out)
Option to add your car CSM or CSX number in lower part of racetrack ($7.00 extra at Check Out)
*Make sure window is clean and dry - Do not use water to put decal on*
- It is easiest to apply banners to a warm windshield.
- Beware of heavy wind when installing.
- Clean windshield thoroughly with water or alcohol, DO NOT use RainX or other polishes.
1) After thorughly cleaning windshield surface, find and mark the center of the windshield with painters tape. Do not use the rear view mirror as a center point as it may not be centered.
2) Locate and mark the center of the windshield banner. The center can easily be found by folding it lengthwise in two to make a crease.
3) Once centers are found place on windshield so as to become familar with desired location.
4) Recommended method of installation is the Center Hinge. This is achieved by carefully removing a 2"-3" portion of the backing paper from the center.
5) Once this portion of the center is removed, simply fold back each side of the backing paper approximately 1" onto itself
6) Then turn decal over and carefully set it in the desired location, making sure it is centered. When placed correctly, stick the center exposed area down with your thumb.
7) Once "hinged", apply each side of the decal from the center with a squeegee or credit card.
8) Once satisfied, start to peel back the transfer paper very slowly at a sharp angle. If the vinyl appears to be lifting, gently push the transfer paper back down and squeegee that area.
*If after removing the transfer paper you notice bubbles, puncture the vinyl with needle or pin and use squeegee to work out bubbles.
LAUNCH EDITION DRIVER HATS
INTRODUCING THE NEW LAUNCH EDITION HATS
SUPPORT YOUR FAVORITE DRIVER BY SELECTING THE COLOR OF THEIR RACE CAR
HIGH QUALITY MATERIAL
FLEX FIT HAT
SIZES ARE S/L & L/XL
BRADY BEHRMAN #428: GREY & CAROLINA BLUE
TONY HARDIN #67: GREY & BLACK
JUSTIN EMANUEL #33: GREY & ORANGE
CSR SHIFTER KNOB Grabber Orange W/ White Stripes
*Picture does not represent the Color of the Shifter Ball*
This Shifter ball will be Grabber Orange with White Stripes
A sharp addition to your Shelby or Ford vehicle. Premium quality 2-1/8" diameter shift knob with Rally Stripes and your choice of shift pattern. Graphics are subsurface and will not wear off. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. These knobs have a 16mm x 1.50 Brass Master Insert, and come with a threaded Brass Adapter & Jam Nut in the size of your choice.Weight is 5 ounces. 2005 to 2014 factory Mustang shifters REQUIRE a Boot Retainer to complete the installation. A factory shifter with a "ball style" shift knob will require a Narrow boot retainer. A factory shifter with a "non-ball style" shift knob (black and gray thumb shaped) will require a Wide boot retainer. 2015 and newer factory Mustang shifters with a Reverse Lockout require 12mm x 1.25 threads that are recessed to accommodate the Reverse Lockout mechanism. Please allow 4-6 weeks for delivery.
Find Your Thread Size Here: https://www.carrollshelbyracing.com/shifter-knob-find-yours.html#/
Installation Instructions Here: https://www.carrollshelbyracing.com/shifter-knob-instructions.html#/
California Prop 65 Warning Here: https://www.carrollshelbyracing.com/california-prop-65.html#/
Ford Mustang 2018-Up GT-250 Adjustable Wing 67"
**** Carbon Fiber Factory Spoiler Center Pedestals Cover Included****
All GT Series wings feature an all-new, low-drag, aerodynamic 2D designed airfoil shape. The "2D" design allows the wing to maintain a consistent level of downforce across its entire span. Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design.
Each GT Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds.
Gurney flaps are included and pre-installed with every GT-250 wing. These are super lightweight, made using pre-pregnated carbon fiber processes.
SCT X4 Performance Programmer, 1996 THRU 2019
The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE! This product does not support any changes to your vehicle's emission system
* This product is not legal for sale or use in California on pollution controlled motor vehicles
VEHICLE DATA OVERLOAD.
With a HUGE Backlit display, the SCT X4 Power Flash makes it EASY to read the Real Time Vehicle Data, view popular sensor data such as EGT, Air / Fuel Ratio or any other 0-5 Volt source!
Big Power. Small Package
The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE
Custom Tunes. Lots of them.
Stores up to 10 custom tune files created by your local SCT Custom Tuning Dealer.
Built-In Wifi for easy updates
Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.
Reads & Clears PCM Diagnostic Trouble Codes.
- Data Logging
- Need to monitor your vehicle's engine parameters? No need for a separate monitoring device. View & record your vehicle's PCM data on the device or on a PC.
- Dual Analog Inputs
- Monitor EGT temps, air-fuel ratio and other popular sensor data.
- Easy Restoration Back to Stock
- The device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock program. Restoring your vehicle to the stock PCM program is as easy as selecting "Return to Stock" from the device men...
- Full Color Backlit LCD Display
- Full Color LCD display for easy viewing, day or night.
- Holds up to 10 Custom Tunes
- Holds up to 10 custom tuning files for Maximum tune flexibility.
- Increases Horsepower & Torque!
- Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage
- Installs Quickly & Easily
- Installs quickly & easily via your vehicle's OBDII port.
- Most Popular Vehicles Supported
- Most popular Ford vehicles supported including 2014 models.
- Stores 20 Custom Tunes
- Stores up to 20 custom tune files created by your local SCT Custom Tuning Dealer.
- USB Interface Cable Included
- USB Interface Cable & Livelink Datalogging software included
- User Adjustable Vehicle Parameters
- Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears
WHAT YOU CAN ADJUST
Adjustable Options vary for each vehicle and are not available on all vehicles
- Auto Start/Stop
- Disable auto start/stop.
- Axle Ratio
- Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.
- CMCV Delete
- Allows you to disable the CMCV (Charge Motion Control Valve) in your vehicles PCM to prevent a Check Engine light and other issues associated with removing the CMCV plates in your vehicle.
- Disable DOD
- Allows you to disable / enable the Displacement On Demand functions of your vehicles PCM.
- Exhaust Y Pipe
- Support for Kooks High Flow Y Pipes
- Fan Control
- Lowers the Temperature at which the Fan turns on.
- Front Mounted Intercooler
- Adjusts for the usage of a front mounted intercooler
- Fuel Injectors
- Allows you to adjust for different sized fuel injectors.
- Global Spark
- Allows addition or removal of timing across all RPM ranges
- Grill Shutter
- Adjusts calibration to compensate for removal of Grill Shutter
- Allows adjustment for Longtube headers
- Idle Adjust
- Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.
- Intake Airbox
- Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.
- Jake Brake
- Used as an exhaust brake to increase engine braking while coasting towing heavier loads. Helps lower brake temperatures.
- Lock in 1-2-3
- Locks the converter in 1st, 2nd and 3rd. Aids in engine braking, increases fuel economy, and can be used for drag racing as well.
- Locked At CT
- Keeps the torque converter locked during deceleration to aid in engine braking. This is less aggressive than the Jake Brake file so it may be ideal for smaller loads. It can be used in conjunction with the Jake Brake as well.
- Mass Air Meter (MAF)
- Allows you to select from different aftermarket MAF (Mass Air Meters).
- Multiple Displacement System (MDS)
- Enabling the MDS (Multiple Displacement System) initiates a fuel saving 4-cylinder engine mode and disables additional engine cylinders.
- Pedal Response
- Rev Limiter
- Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. One of the most important ways to protect your engine from damage is to keep the RPMs from going too high.
- RPM Based Spark
- Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)
- Shift Assist
- Sound Symposer
- Enable and Disable The Sound Symposer
- Speed Limiter
- Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
- Super Charger Pulley
- Supports aftermarket super charger pulley sizes.
- Take Off Assist
- Throttle Body
- Compensates for aftermarket Throttle Bodies (BBK 65/85/90 MM)
- Tire Size
- Correct the speedometer if you have changed your tire size from stock.
- Torque Reduction
- Reduce torque durning shifting (makes shift more firm)
- Change or disable the Tire Pressure Monitoring System.
- Traction Control
- Allows you to disable the vehicles Traction Control without using the button in the vehicle.
- Transmission Shift Firmness
- Change the shift firmness of an automatic transmission.
- Transmission Shift Points
- Change the RPMs at which an automatic transmission will change gears.
MGW Shelby GT500 Short Throw Shifter 2007-2014
This new design shifter for the 2007-2014 GT500 is truly ground breaking. We have successfully engineered the first "top loader" design shifter for the TR6060 transmission. No more sloppy in gear play! New front to back shift throw ratio virtually eliminates 2nd grind. 100% machined in the USA! The feel and performance of this center-line shifter design truly blows away the competition. The sloppy loose feel of the OEM setup is completely resolved. Power-shift to your hearts content!
MGW Mustang Billet T56 Magnum XL 2005 - Present
The MGW billet shifter for the Tremec T56 Magnum XL transmission is now available. This shifter kit comes complete with shift handle and all mounting hardware needed for installation. Features 30 percent reduction in throw and strong return springs for a perfect 2-3 shift. Handle and shaft are adjustable for position and height.
Shift knob not included. Please see our selection in Shifter Knobs.
MGW Mustang T5 T45 Short Throw Shifter 1982-2004
- Each shifter boasts the shortest throw in its class.
- Absolutely the quietest aftermarket shifter you can buy.
- 360° adjustability of the shift knob position means no more reaching for gears.
- Centering springs are the strongest in their class. (No more missing 3rd gear)
- Reduces "In Gear" slop, vibration and buzzing.
- Fully Adjustable shifter stops to prevent broken or bent shift forks.
- No modification of factory inner boot necessary.
- Accepts Factory or aftermarket shift knobs with 12mm threads.
- Class III Teflon Impregnated Hard Coat Anodized to prevent galling and grease contamination.
Our Handles are CNC Machined from aircraft grade aluminum and are mated with a high stress tempered threaded shaft exceeding grade 8 standards. You WILL NOT break these handles EVER. They are guaranteed for life!
Custom License Plate Bracket SHELBY GT350, GT350R, 2015-2019
The bracket that holds the license plate is laser cut from 16ga plate stainless steel (NOT PLASTIC) weighing in at only 7 oz. with the license plate attached. It has rubber bumper protection in place, to prevent vibration and so no metal part of the bracket never touches the painted portion of the car.
The mounting base is 6061 Billet Aluminum machined mounting base. It comes with a custom knurled thumb nut used to fasten the license plate bracket to the mounting base. The mounting base is attached to the bumper cover, out of sight, using 3M 4910 VHB (Very High Bond) adhesive tape, some of 3M’s strongest bonding tape on the market. This VHB tape will bond despite extreme ground-to-air temperature swings of 194°F to -30°F (90°C to -35°C) and support up to 90 lbs/in2. This bracket has 3 square inches of tape that adheres.
The all new attachment design was tested at various stages. It was initially tested by mounting the base to a painted surface with the bracket attached and we let it sit for a week; it didn’t move. Then we hung 10lbs of weight off the mounting base with the bracket attached and let it sit for a week; it didn’t move. Then we hung 41lbs of concrete off the mounting base; it didn’t move. Then we mounted it on a 2015-17 Mustang GT, took it up to 100mph (for a short period of time) using the 3M tape mounting option; it didn’t move. The mount is tested and proven and under no circumstances requires any additional screws to hold it in place. We did not test this mount with any heavy metal style license plate frames, only plastic frames and covers.
* Made in the USA from non-corrosive metal (aluminum and stainless steel)
* Light weight
* Quickly and easily removable for car shows and cleaning
* Places the license plate on the center of the bumper where it was intended to be mounted.
Note: This bracket will not work on cars with an aftermarket billet style grill installed in the lower air dam.
NOT MEANT FOR USE WITH HEAVY METAL STYLE LICENSE PLATE FRAMES.
REMOVE BRACKET PRIOR TO USING ANY TYPE OF AUTOMATIC (Brush or Touch-less) STYLE CAR WASH.