Xtreme-Grip™ Torque Arm System 2005-2014 Mustang S197
The torque arm system allows you to eliminate the factory upper 3rd link on your existing mustang suspension which can be a significant source of noise and vibration when aftermarket upper links are installed.
*Does not come with Diff cover, but can be added as an option*
Get the best of both worlds and install this effective, quiet, and easy to install bolt-on product. You will not be disappointed!
* Requires 8.8 rear end.
Maximize Grip and Cornering
Our torque arm delivers unsurpassed corner exit and straight-line grip without sacrificing cornering ability.
The unique CorteX mounting design also provides ample driveshaft clearance for most 1-piece driveshaft.
*Shipping times may vary based on stock status and/or level of customization, if any. Contact us and we are glad to help with more specifics on your product.
The Xtreme-Grip™ Torque Arm is a rear suspension component that delivers unsurpassed corner exit and straight-line rear grip without sacrificing cornering ability. You can also expect a significant decrease in front end dive under braking since the rear axle rotational loads are now applied much closer to the center of gravity. These improvements are accomplished by changing the anti-squat and anti-lift geometry of the rear suspension.
Why Lowered Cars Need a Torque Arm
When a mustang is lowered from the factory ride height the rear suspension geometry is compromised reducing rear grip under acceleration. Relocating the lower control arms pivots on the axle is a step in the right direction, however, more improvement is possible. Our torque arm system allows significantly more anti-squat to be added to your mustang than with a 3 or 4 link design while still having correct rear axle roll steer.
Increase Traction Power
With a CorteX Torque Arm design, the rear tires are loaded more evenly than a 3-link design further maximizing traction.
Note: Requires 8.8 rear end.
If you are not buying the Xtreme-Grip Watts Link system in combination, you will also need to purchase the Super Low Profile TA Performance rear end differential cover in order to install this torque arm (select in options).