Xtreme-Grip™ Vintage Front Suspension System 67-70 Mustang and Cougar
Our Xtreme-Grip Vintage Front Suspension System 67-70 Mustang and Cougar is a complete redesign and utilizes modern geometry that is suited for today’s performance tires. With a properly built car, this system will provide the handling needed to run down supercars.
Vehicles: Ford Mustang (1967- 1970) and Mercury Cougar (1967- 1970)
Modern Geometry, Pro Touring Upgrade
A complete redesign and utilizes modern geometry that is suited for today’s performance tires.
If you’ve ever driven a vintage mustang and shared the road with modern cars you understand that it can be a white knuckle ride. Even with standard aftermarket improvements that are readily available the steering is sloppy, vague, and unresponsive to driver inputs. With the investment required to buy and maintain a vintage mustang these days, we feel it make sense to spend a small percentage of the total vehicle value toward excellent handling. There numerous front suspension systems on the market that are based on the OEM Ford geometry and they just do not measure up to CorteX’s standards. That is why we went through the trouble of re-engineering everything on both the front and rear suspension to offer customers a complete system that is capable of supercar levels of handling and control.
The OEM shocks tower can either remain in place for an OEM underhood appearance or be trimmed/removed.
Stiffer Stronger Chassis
We engineered our suspension to increase chassis strength and stiffness for superior response. The geometry optimizes the roll center height, lateral roll center migration, and minimizes bumpsteer all the while allowing the build to adjust ride height as much as 2.5 inches to achieve the optimal stance both at the track and on the street.
Stock vintage Mustangs have lightweight flimsy unibody chassis that can compromise handling.
Other systems require the car to be completely cut up for installation which makes the vehicle even flimsier than it was from the factory while adding additional weight in the process.
Easy Install with Minimal Mods
The CorteX Xtreme-Grip Vintage Suspension System is designed for easy installation with minimal permanent modifications to your pony. In fact, it is even possible to install the complete front suspension and retain the OEM shock towers for a factory underhood appearance.
- K-member with Small Block Ford Motor Mounts
- Lower Control Arms (LCA)
- Upper Control Arms (UCA)
- Bumpsteer kit
- Shock Mounts/ UCA mount
- Upper Ball Joint Adapter for SN95 Spindles
- Quick Ratio Power Steering Rack and Pinion
- Splined, Zero Friction, Adjustable Anti Roll Bar
- Coilover shocks – Koni standard, JRi, Penske, and Öhlins available as options
What else you will need
- 1996-2004 SN95 Spindles and hubs
- Brake brackets are available for a variety of calipers but not included
- Lower steering shaft