brakes/brake cooling
cooling
exhaust
INTAKE & GEARING
Interior/Exterior
ramp/chocks
Race Ramps XT - 67 inch
Race Ramps are designed with the automotive enthusiast in mind! Unlike other generic ramp systems that either don't work on lowered vehicles or need an odd arrangement of 2x4's to roll onto, Race Ramps utilize a long, low-angle incline to allow you to work under any car. Race Ramps are constructed with a solid, single-piece design that is light-weight (each is only 15 lbs) yet can hold up to 3000 lbs per set. The 67" Race Ramps XT from Brute Industries are 2 inches taller and wider then the 56" Race Ramps, making it even easier to work on your car!
Race Ramps XT - 67 inch (2 piece)
Race Ramps are designed with the automotive enthusiast in mind! Unlike other generic ramp systems that either don't work on lowered vehicles or need an odd arrangement of 2x4's to roll onto, Race Ramps utilize a long, low-angle incline to allow you to work under any car. The 2-piece style offers additional room to work under the car - simply remove the sloped section for extra space! The unique design offers all the stability and safety of the 1-piece models, but with extra convenience. The 67" Race Ramps XT from Brute Industries are 2 inches taller and wider then the 56" Race Ramps, making it even easier to work on your car!
Part Number: BRURRXT2
Manufacturer: RR-XT-2
• 67 inches long, 14 inches wide
• 10 inch lift height -- works with other products!
• 10.75 degree incline
• 1 set supports up to 3,000 pounds
9" H TRAILER RAMP WITH FLAP CUT-OUT - 5.5 DEGREE APPROACH ANGLE
This set of 9-inch high trailer ramps makes loading your race car, sports car or other low-profile vehicle an easy, scrape-free process on track day, at a car show, or during a multi-state trip.
MORE INFORMATION
Use our trailer ramp calculator to make sure you're choosing the ramp that's tailored to your car and trailer needs. Both 9-inch high trailer ramps measure 95 inches long and have a 5.5-degree approach angle. They also have an 18-inch flap that can accommodate 14 to 18-inch trailer flaps without compromising the angle of approach. Each lightweight 12-pound ramp can hold up to 1,500 pounds and comes with a built-in carrying strap. They are ideal for tire widths up to 12 inches. To use them with your trailer, simply lower your trailer door down into the 5-inch long by 1-inch high notch and drive your car up and into your trailer - it’s that easy!
These trailer ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Pair
Length: 95"
Width: 14"
Height: 8"
Approach Angle Degree: 5.5°
Cutout Size: 18"
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 12"
Weight: 12 lbs.
Color: Black
Material: Expanded foam with traction coating
10" H TWO-PIECE TRAILER RAMP - 3.8 DEGREE APPROACH ANGLE
Use a set of our two-piece 10-inch high trailer ramps to avoid scraping or removing the front bumper of your race car, sports car, lowered car or other low profile vehicle as you load it into your trailer for your next track day, car show, or multi-state trip.
Both 10-inch high trailer ramps measure 131 total inches long. They come in two pieces due to the length: the lower 68-inches has a 3.8-degree approach angle, and the upper 68 inches has a 5-degree angle. Each ramp only weighs 15 pounds in total, yet can hold up to 1,500 pounds. The upper pieces have a built-in carrying strap. They are ideal for tire widths up to 12 inches. To use them with your trailer, simply lower your trailer door down into the 5-inch long by 2.5-inch high notch and drive your car up and into your trailer - it’s that easy!
These trailer ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won’t slide on any surface, including ice, making them a versatile choice in any weather condition.
11" H TWO-PIECE TRAILER RAMP - 5.4 DEGREE APPROACH ANGLE
MORE INFORMATION
Use our trailer ramp calculator to make sure you're choosing the ramp that's tailored to your car and trailer needs. Both 11-inch high trailer ramps measure 131 total inches long (each piece measures approx. 68 inches with a center overlap). The initial angle of approach is only 4.3 degrees, and it increases to 5.4 degrees at the top piece of the ramp. Each ramp only weighs 17 pounds in total, yet can hold up to 1,500 pounds. The upper pieces have a built-in carrying strap. They are ideal for tire widths up to 12 inches. To use them with your trailer, simply lower your trailer door down into the 5-inch long by 3-inch high notch and drive your car up and into your trailer - it’s that easy!
These trailer ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Pair
Length: 131"
Width: 14"
Height: 11"
Approach Angle Degree: 5.4°
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 12"
Weight: 17 lbs.
Color: Black
Material: Expanded foam with traction coating
80" MULTI-PURPOSE COMBO RAMPS - 8.5 DEGREE APPROACH ANGLE
Our set of two-piece 80-inch Combo Ramps are the "triple header" of ramps! Use them as service ramps in the garage, trailer ramps when loading, or remove the ramp portion and use them as wheel cribs for display or service.
MORE INFORMATION
Engineered with a dual purpose, the ramp section of this two-piece design can be flipped over and used as a loading ramp for your low profile or lowered car with a convenient notch for your trailer door. Please note that this will not work for all trailers or vehicles, as it will depend on your trailer dimensions and car's front clearance angle. They have an 8.5-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds yet each ramp only weighs 22 pounds. For more information about trailer ramps, please visit our trailer ramps page.
These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won't slide on any surface, including ice and smooth auto shop floors.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Pair
Length: 80"
Width: 14"
Height: 12-1/4"
Weight: 22 lbs.
Lift Height: 10"
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 12"
Approach Angle Degree: 8.5°
Material: Expanded foam with traction coating
Color: Black
5" H LIP NOSE RACK RAMP - 8.6 DEGREE APPROACH ANGLE
Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 40-inch long lip-nose Rack Ramps.
MORE INFORMATION
They have an 8.6-degree approach angle and come with a 3-inch lip bridge. The 14-inch width works with tires up to 12 inches wide. Each rack ramp weighs 9 pounds, and can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. From the ground to the underside of the ramp lip measures 5 inches, and the ground to the top of the ramp lip measures 5.5 inches.
These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Pair
Length: 40"
Width: 14"
Height: 5"
Weight: 9 lbs.
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 12"
Approach Angle Degree: 8.6°
Material: Expanded foam with traction coating
Connector: 3" bridge
Color: Black
5" H HOOK NOSE RACK RAMP - 6.4 DEGREE APPROACH ANGLE
Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 48-inch long hook-nose Rack Ramps.
MORE INFORMATION
They have a 6.4-degree approach angle and come with a 3-inch hook. The 14-inch width works with tires up to 12 inches wide. Each rack ramp weighs 9 pounds, and can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. They provide 5 inches of lift height.
These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Pair
Length: 48"
Width: 14"
Height: 5"
Weight: 9 lbs.
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 12"
Approach Angle Degree: 6.4°
Material: Expanded foam with traction coating
Connector: 3" hook
Color: Black
FLATSTOPPERS CAR STORAGE RAMPS - 4 PACK
You're pulling your collector's car out of storage for the first time this year and see flat spots on your tires once again. You sigh, knowing that you can expect a bumpy ride for a while or that you'll have to replace them if those spots won't go away. Don't let that happen again!
MORE INFORMATION
FlatStoppers have been saving thousands of tires worldwide while they're stuck in winter or long-term storage and they are more affordable than the cost of replacing your tires. When you're parking your car for 30 days or more, simply drive onto our best-selling 28-inch long FlatStoppers and your tires will settle into the concave depression of the pads to evenly disperse the weight of the car across the increased contact patch and prevent flat spots. This set of four 10-inch wide FlatStoppers can accommodate tires up to 8 inches wide, and has a total weight capacity of 6,000 pounds (each FlatStopper supports up to 1,500 pounds). After the 8.9-degree approach incline, the depression follows the natural shape of your tire to keep it in great condition until the next time you drive, and repositioning the ramps is easy as they only weigh 1.5 pounds apiece.
FlatStoppers are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight tire storage solution that is strong, yet durable. They won't slide, scratch, or damage your floors, and won't conduct heat or cold from the surface to your tires, making them a versatile solution in hot or cold weather applications.
USAGE
Use on a level, flat surface. Ensure that the bottom of each Flatstopper makes full contact with the ground. You may notice indentations in the Flatstopper after you remove the car. This is normal as the Flatstopper is conforming to the tire.
SPECIFICATIONS
Sold As: Set of four
Length: 28"
Width: 10", 14", & 16"
Height: 3.29"
Lift Height: 1.25"
Material: Expanded foam with traction coating
Approach Angle Degree: 8.9°
Maximum Capacity: 1,500 lbs. per ramp
Color: Black
TRAILER SIDE KICK RAMP - 13 DEGREE APPROACH ANGLE
The Trailer Side Kick is helpful both for parking your vehicle inside your trailer and for changing a trailer tire.
MORE INFORMATION
For parking inside a trailer, the Side Kick fits in front of a trailer's wheel wells to provide a tapered, protective guide between your vehicle's wheels and the trailer's steel wheel wells. For changing a trailer tire, simply drive the good tire onto the ramp and the flat tire will be lifted off of the ground for easy removal and replacement. The Side Kick can be used on any level surface without sinking, even grass, or even sand. The Side Kick provides 7.5 inches of lift with a 13-degree angle of approach. Weighing in at only 8 pounds, it can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. It accommodates tires up to 10 inches wide.
The Side Kick Ramp is manufactured using an exclusive, patented process. It is constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Each
Length: 31"
Width: 12"
Height: 7-1/2"
Weight: 8 lbs.
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 10"
Approach Angle Degree: 13°
Material: Expanded foam with traction coating
Color: Black
5" H HOOK NOSE RACK RAMP - 6.4 DEGREE APPROACH ANGLE
Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 48-inch long hook-nose Rack Ramps.
MORE INFORMATION
They have a 6.4-degree approach angle and come with a 3-inch hook. The 14-inch width works with tires up to 12 inches wide. Each rack ramp weighs 9 pounds, and can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. They provide 5 inches of lift height.
These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Pair
Length: 48"
Width: 14"
Height: 5"
Weight: 9 lbs.
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 12"
Approach Angle Degree: 6.4°
Material: Expanded foam with traction coating
Connector: 3" hook
Color: Black
5" H LIP NOSE RACK RAMP - 8.6 DEGREE APPROACH ANGLE
Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 40-inch long lip-nose Rack Ramps.
MORE INFORMATION
They have an 8.6-degree approach angle and come with a 3-inch lip bridge. The 14-inch width works with tires up to 12 inches wide. Each rack ramp weighs 9 pounds, and can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. From the ground to the underside of the ramp lip measures 5 inches, and the ground to the top of the ramp lip measures 5.5 inches.
These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
SPECIFICATIONS
Sold As: Pair
Length: 40"
Width: 14"
Height: 5"
Weight: 9 lbs.
Maximum Capacity: 1,500 lbs.
Maximum Tire Width: 12"
Approach Angle Degree: 8.6°
Material: Expanded foam with traction coating
Connector: 3" bridge
Color: Black
30" W X 8" H LIGHTWEIGHT TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 30-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs
MORE INFORMATION
This 30-inch wide Trailer Step is 8 inches high, and comes with a strap for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 30"
Width: 11-1/4"
Height: 8"
Weight: 10 lbs. per piece
Maximum Capacity: 1,500 lbs. per piece
Material: Expanded foam with traction coating
Color: Black
35.5" W X 8" H LIGHTWEIGHT TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 35.5-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.
MORE INFORMATION
This 35.5-inch wide Trailer Step is 8 inches high, and comes with a strap for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 35-1/2"
Width: 11-1/4"
Height: 8"
Weight: 12 lbs. per piece
Maximum Capacity: 1,500 lbs. per piece
Material: Expanded foam with traction coating
Color: Black
24" X 23" LIGHTWEIGHT TWO-STEP TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 24-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.
MORE INFORMATION
This 24-inch wide Trailer Step has two 7.75-inch steps, and comes with a cutout for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 24"
Width: 23"
Height: 15-1/2"
Weight: 25 lbs. per piece
Maximum Capacity: 1,500 lbs.
Material: Expanded foam with traction coating
Color: Black
36" X 23" LIGHTWEIGHT TWO-STEP TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 36-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.
MORE INFORMATION
This 36-inch wide Trailer Step has two 7.75-inch steps, and comes with a cutout for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 36"
Width: 23"
Height: 15-1/2"
Weight: 27 lbs. per piece
Maximum Capacity: 1,500 lbs.
Material: Expanded foam with traction coating
Color: Black
12" ONE-PIECE MULTI-PURPOSE WHEEL CRIBS - 1,500 LBS CAPACITY
Safer than jack stands and far more attractive, our multi-purpose 12-inch Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility.
MORE INFORMATION
Whether being used for fluid changes, general maintenance, detailing, or lifting up your vehicle at a show, these wheel cribs will truly be the talk of the town. Sold in pairs, each crib can hold up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds, and they support tire diameters 24 to 30 inches. They are also incredibly lightweight at 7 pounds per crib – perfect for taking with you to shows or moving around your shop. For a particularly sharp show display, use them in conjunction a show mirror.
These cribs are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight support solution that is strong, yet durable. They won't slide, scratch, or damage your floors, and won't conduct heat or cold from the surface to your tires, making them a versatile solution in hot or cold weather applications.
USAGE
Use on a flat, level surface. Ensure that the bottom of each crib makes full contact with solid ground
10" LIFT HEIGHT CRIB CRUISERS
Crib Cruisers are multi-functional wheel cribs that work with Zoom Jacks, GoJaks or other car dollies to lift up and reposition a car for service or display while keeping it cradled above the ground.
Great for service shops, restoring projects, custom builds, restyling and detail work, Crib Cruisers weigh in at only 12 pounds per crib so they’re easy to store, move and position. Each crib holds up to 1,500 pounds per wheel for a total vehicle weight capacity of 6,000 pounds, and they can support tires up to 12 inches wide and 25 to 30 inches in diameter.
The Crib Cruisers are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won't slide on any surface, including garage and workroom floors.
RUBBER WHEEL CHOCKS WITH EXTRA GRIP - SET OF TWO
These chocks are suitable for sports cars with low clearance as well as heavy duty vehicles, and they have a saw-tooth bottom for extra-strong grip. They are manufactured for lightweight strength with hollowed 100% recycled rubber and only weigh 1.5 pounds for chock for easy positioning. They won't slip, even when wet, and can be used on any floor type.
USAGE
Use on a flat, level surface. Ensure that the bottom of each chock makes full contact with solid ground.
SPECIFICATIONS
Sold As: Pair
Length: 6"
Width: 5"
Height: 4"
Weight: 1.5 lbs. per chock
Material: Rubber
Color: Black
RUBBER WHEEL CHOCKS WITH EXTRA GRIP - SET OF FOUR
Use this set of four hard rubber wheel chocks to keep tires secure while your car is up on a set of Race Ramps, or as added security when parked on a flat surface.
These chocks are suitable for sports cars with low clearance as well as heavy duty vehicles, and they have a saw-tooth bottom for extra-strong grip. They are manufactured for lightweight strength with hollowed 100% recycled rubber and only weigh 1.5 pounds for chock for easy positioning. They won't slip, even when wet, and can be used on any floor type.
USAGE
Use on a flat, level surface. Ensure that the bottom of each chock makes full contact with solid ground.
SPECIFICATIONS
Sold As: Set of four
Length: 6"
Width: 5"
Height: 4"
Weight: 1.5 lbs. per chock
Material: Rubber
Color: Black
