AIr/Fuel
Brake/brake cooling
Cortex sUSPENSION
engine
exterior/interior
ramps/chocks
30" W X 8" H LIGHTWEIGHT TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 30-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs
MORE INFORMATION
This 30-inch wide Trailer Step is 8 inches high, and comes with a strap for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 30"
Width: 11-1/4"
Height: 8"
Weight: 10 lbs. per piece
Maximum Capacity: 1,500 lbs. per piece
Material: Expanded foam with traction coating
Color: Black
35.5" W X 8" H LIGHTWEIGHT TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 35.5-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.
MORE INFORMATION
This 35.5-inch wide Trailer Step is 8 inches high, and comes with a strap for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 35-1/2"
Width: 11-1/4"
Height: 8"
Weight: 12 lbs. per piece
Maximum Capacity: 1,500 lbs. per piece
Material: Expanded foam with traction coating
Color: Black
24" X 23" LIGHTWEIGHT TWO-STEP TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 24-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.
MORE INFORMATION
This 24-inch wide Trailer Step has two 7.75-inch steps, and comes with a cutout for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 24"
Width: 23"
Height: 15-1/2"
Weight: 25 lbs. per piece
Maximum Capacity: 1,500 lbs.
Material: Expanded foam with traction coating
Color: Black
36" X 23" LIGHTWEIGHT TWO-STEP TRAILER STEP
Use it with your trailer, or around your garage or workshop. The sturdy, lightweight 36-inch wide Trailer Step is helpful step up and provides an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.
MORE INFORMATION
This 36-inch wide Trailer Step has two 7.75-inch steps, and comes with a cutout for easy carrying and repositioning. It can support up to 1,500 pounds apiece, and is sold individually.
Each trailer step is manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.
USAGE
Use on a flat, level surface. Ensure that the bottom of each step makes full contact with solid ground.
SPECIFICATIONS
Sold As: Each
Length: 36"
Width: 23"
Height: 15-1/2"
Weight: 27 lbs. per piece
Maximum Capacity: 1,500 lbs.
Material: Expanded foam with traction coating
Color: Black
RUBBER WHEEL CHOCKS WITH EXTRA GRIP - SET OF FOUR
Use this set of four hard rubber wheel chocks to keep tires secure while your car is up on a set of Race Ramps, or as added security when parked on a flat surface.
These chocks are suitable for sports cars with low clearance as well as heavy duty vehicles, and they have a saw-tooth bottom for extra-strong grip. They are manufactured for lightweight strength with hollowed 100% recycled rubber and only weigh 1.5 pounds for chock for easy positioning. They won't slip, even when wet, and can be used on any floor type.
USAGE
Use on a flat, level surface. Ensure that the bottom of each chock makes full contact with solid ground.
SPECIFICATIONS
Sold As: Set of four
Length: 6"
Width: 5"
Height: 4"
Weight: 1.5 lbs. per chock
Material: Rubber
Color: Black
12" ONE-PIECE MULTI-PURPOSE WHEEL CRIBS - 1,500 LBS CAPACITY
Safer than jack stands and far more attractive, our multi-purpose 12-inch Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility.
MORE INFORMATION
Whether being used for fluid changes, general maintenance, detailing, or lifting up your vehicle at a show, these wheel cribs will truly be the talk of the town. Sold in pairs, each crib can hold up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds, and they support tire diameters 24 to 30 inches. They are also incredibly lightweight at 7 pounds per crib – perfect for taking with you to shows or moving around your shop. For a particularly sharp show display, use them in conjunction a show mirror.
These cribs are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight support solution that is strong, yet durable. They won't slide, scratch, or damage your floors, and won't conduct heat or cold from the surface to your tires, making them a versatile solution in hot or cold weather applications.
USAGE
Use on a flat, level surface. Ensure that the bottom of each crib makes full contact with solid ground
10" LIFT HEIGHT CRIB CRUISERS
Crib Cruisers are multi-functional wheel cribs that work with Zoom Jacks, GoJaks or other car dollies to lift up and reposition a car for service or display while keeping it cradled above the ground.
Great for service shops, restoring projects, custom builds, restyling and detail work, Crib Cruisers weigh in at only 12 pounds per crib so they’re easy to store, move and position. Each crib holds up to 1,500 pounds per wheel for a total vehicle weight capacity of 6,000 pounds, and they can support tires up to 12 inches wide and 25 to 30 inches in diameter.
The Crib Cruisers are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won't slide on any surface, including garage and workroom floors.
FLATSTOPPERS CAR STORAGE RAMPS - 4 PACK
You're pulling your collector's car out of storage for the first time this year and see flat spots on your tires once again. You sigh, knowing that you can expect a bumpy ride for a while or that you'll have to replace them if those spots won't go away. Don't let that happen again!
MORE INFORMATION
FlatStoppers have been saving thousands of tires worldwide while they're stuck in winter or long-term storage and they are more affordable than the cost of replacing your tires. When you're parking your car for 30 days or more, simply drive onto our best-selling 28-inch long FlatStoppers and your tires will settle into the concave depression of the pads to evenly disperse the weight of the car across the increased contact patch and prevent flat spots. This set of four 10-inch wide FlatStoppers can accommodate tires up to 8 inches wide, and has a total weight capacity of 6,000 pounds (each FlatStopper supports up to 1,500 pounds). After the 8.9-degree approach incline, the depression follows the natural shape of your tire to keep it in great condition until the next time you drive, and repositioning the ramps is easy as they only weigh 1.5 pounds apiece.
FlatStoppers are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight tire storage solution that is strong, yet durable. They won't slide, scratch, or damage your floors, and won't conduct heat or cold from the surface to your tires, making them a versatile solution in hot or cold weather applications.
USAGE
Use on a level, flat surface. Ensure that the bottom of each Flatstopper makes full contact with the ground. You may notice indentations in the Flatstopper after you remove the car. This is normal as the Flatstopper is conforming to the tire.
SPECIFICATIONS
Sold As: Set of four
Length: 28"
Width: 10", 14", & 16"
Height: 3.29"
Lift Height: 1.25"
Material: Expanded foam with traction coating
Approach Angle Degree: 8.9°
Maximum Capacity: 1,500 lbs. per ramp
Color: Black